BT.2100 — a New International Standard for HDR

In July of 2016, the ITU-R BT.2100 international standard for HDR was established. As a result of this, the standards for content production and transmission have been determined, and it is expected that the adoption of HDR will be further accelerated.

As the table below shows, the five elements introduced on the previous page have clearly been gradually evolving since the establishment of the BT.709 standard for full HD. Though BT.2020 and BT.2100 are substantially very similar, they differ in the dynamic range that can be displayed.

Print table
Internationale HDR-Standards
BT.709 (Current Full HD Standard) BT.2020 (4K/8K Standard) BT.2100 (4K/8K HDR Standard)
Resolution Full HD 4K, 8K HD, 4K, 8K
Bit Depth 8 bit 10 or 12 bits 10 or 12 bits
Frame Rate Up to 60p Up to 120p Up to 120p
Colour Gamut Rec.709 Rec.2020 Rec.2020
Brightness (Dynamic Range) SDR SDR HDR
BT.2100: SDR
BT.2100: HDR

Two Gamma Curves

In order to properly display HDR images, it's not enough to simply raise the level of brightness — it's crucial to display colour and tones in a way that matches human eyesight. Colour and tones are affected by an input-output characteristic called gamma that each input and output device has.

The BT.2100 standard provides two gamma curves as standards for different types of production work.

  • For Internet Streaming and Movies: PQ (Perceptual quantization)
  • For Broadcast TV: HLG (Hybrid Log-Gamma)

The PQ gamma curve is based on the characteristics of human visual perception, and is most suitable for the production of movies or streaming video content on the internet, where reproduction accuracy is key. On the other hand, the HLG gamma curve is intended to allow for display on existing SDR TVs without looking out-of-place, and is most suitable for broadcast TV and live video feeds.

Print table
Advantages of the PQ and HLG Gamma Curves for HDR
PQ (Perceptual Quantization) HLG (Hybrid Log-Gamma)
Target Internet video streaming, movies Broadcast TV, live video
Advantages Handles brightness in absolute values of up to 10,000 cd/m²; New gamma curve based on human visual perception Handles brightness as relative values (same as existing standards); Compatible with SDR TVs
Peak Brightness Absolute value of 1,000 cd/m²; Consistent, regardless of display device Relative value; Varies by display device
Black Level 0.005 cd/m² or lower 0.005 cd/m² 0.005 cd/m² or lower
Proposed by Dolby BBC and NHK
Reference Standards SMPTE ST 2084 and ITU-R BT.2100 Outstanding Good
Appearance on SDR TVs Poor Fair
Live Broadcasts Fair Outstanding

The graph below shows both the PQ and HLG gamma curves for HDR.

The peak brightness of PQ gamma curve is fixed at 1,000 cd/m² (or higher). To put it another way, the gamma curve is always the same, with an upper limit of 1,000 cd/m², regardless of the peak brightness of the display device, allowing for consistent image reproduction.

On the other hand, the HLG gamma curve's peak brightness is whatever the peak brightness of the display device is. In other words, because the gamma curve varies depending on the peak brightness of the display device, it allows for acceptable viewing of HDR content even on existing SDR displays, with less image degradation.

Comparison of PQ and HLG Gamma Curves for HDR
Comparison of PQ and HLG Gamma Curves for HDR