Heat, cold, vibration – the monitor is able to withstand the permanent strains of the maritime environment. It fulfills the IEC 60945 device standard for the fields of the environment and electromagnetic compatibility required for the licensing of maritime equipment. It also boasts an IP65 rating, and is even protected against dust and hose water getting into it. Other properties: A special coating protects the electronics from moisture. And the ventilator of the monitor can be accessed easily for a simple replacement.
Approved by classification companies
The monitor fulfills the requirements of the following classification companies: GL (Germany), BV (France), LR (UK), DNV (Norway), ABS (USA), ClassNK (Japan), KR (Korea) and CCS (China).
Large viewing angle thanks to VA technology
The VA panel offers a high contrast ratio and a very large viewing angle on the image. The contrast and colors of the image remain the same from almost every viewing angle. The anti-reflection coating also reduces annoying reflections, even when looking at the monitor from the side.
Optimum legibility even during bright daylight
Optional optical bonding reduces annoying reflections and improves readability even during bright daylight. A thin layer of resin is filled between the LCD module and the top pane to bind the two together firmly. The screen has less reflections. And what's more: The screen is more resistant to impact and generally more resistant as a whole.
24/7 use guaranteed
The monitor is built for 24-hour use is impressively reliable. That is why EIZO gives a 3 years warranty.
The monitor's gamma, brightness, and RGB colour space are calibrated in the factory. The colour rendering and display precisely fulfills the specifications of the ECDIS system and RADAR application in accordance with the IEC 61174, IEC 62288, and IEC 62388 standards.
Suitable for day and night operation: Thanks to the wide dimming range from less than 1 cd/m2 to 470 cd/m2, the monitor is ideally suited to changing light conditions. This means that the brightness of the monitor can be optimally configured for all ambient lighting and can be used without problems even in dark rooms.
Thanks to the capacitive touchscreen, the monitor can be operated using a finger or touch pen. Typing, dragging, rotating, minimising – everything works quickly and directly. In addition, it is highly resistant to dust and water droplets, preventing unintentional entries.
Repairs and on-site exchanges are carried out via our service partner:
Please use the free service contact form:
Office hours are Monday-Friday from 08:00 a.m. to 04:30 p.m.
For repairs outside the warranty, you will receive a cost estimate without delay.
To keep your monitor looking like new at all times and to prolong the service life of your device, we recommend cleaning it regularly. Clean the casing and LCD surface as described below:
IMPORTANT: Never use thinner, benzene, alcohol (ethanol, methanol or isopropyl alcohol), scouring agents or other strong solvents as these may damage the casing and the LCD display.
Remove marks by wiping the casing with a soft cloth, which you have previously moistened with a mild cleaning agent. Never spray wax or cleaning agents directly on to the casing. (The manual contains exact details.)
Where necessary, the monitor surface may be cleaned using a soft cloth (for example a cotton cloth or glasses cloth). Stubborn marks can generally be removed by wetting the cloth with a bit of water to increase the cleaning strength.
We cannot make a direct recommendation. The output signal should be digital and should support the maximum resolution of the monitor.
The viewing angle relates to the angle, beneath which the contrast is better than 10:1. These are normally values of 160° to 178°. These values do not provide any information about what enormous differences in contrast may result within the viewing angle. The contrasts should not change significantly for users with a perpendicular view and a slightly side-on view. It must not make a difference whether the viewer is looking at the middle of the image or the edge of the image. How much the contrast stability varies with different LCD technologies is best checked using a measurement diagram or by a direct visual comparison. The more stable the contrast in the user's viewing frustum, the better the image rendering.
Contrast is the ratio of white to black and for monitors is normally stated as a dark room contrast from a controlled laboratory environment. Typical contrasts on printed paper are 6:1 for newspapers, 31:1 for laser printers, 49:1 for photo paper. For example, dark room contrasts cannot be achieved in the office because an extremely deep black cannot be achieved in normal ambient light – even with the screen turned off.